I recently finished a spring cleaning of my closet and collected a small pile of outdated, ripped up and no-longer-can-squeeze-into jeans (why was I holding on to these for so long?). I had been thinking of making a durable blanket for an upcoming camping trip. Also, with summer upon us and my family spending lots of time outdoors, a picnic blanket was much needed. Rather than heading to the store I decided to use up all of that great denim fabric to make a picnic blanket. Here are the do-it-yourself instructions to turn a bunch of unwanted jeans into a stunning and useful picnic blanket.
Before taking out my fabric scissors, I had to do some simple math calculations to determine the number of square pieces I was going to need for the blanket. I knew I wanted to do a quilt-inspired blanket. So here’s the math:
1. I chose the size of each of my finished squares to be 6” . I added ½” seam allowance to all sides which gave me a square template measuring 7” x 7”.
2. I knew a good size picnic blanket would be about 60” wide x 70” long.
- For the width - I multiplied my 6” finished square x 9 squares to get 54” wide.
- For the length - I multiplied my 6” finished square x 11 squares to get 66” long.
**So my finished blanket would be 54” wide (or 9 squares) x 66” (or 11 squares) long. Close enough to my desired size!
3. Next, I simply multiplied length x width (in squares) to get total # of needed squares:
- 9 squares * 11 squares = 99 squares (total)
4. I created a square template measuring 7”x7” out of cardstock to use as my cutting guide.
5. I cut up the jeans into usable fabric pieces. I cut the jeans along either the inseams or the outseams to avoid wasting any fabric.
Finally the preparation was done and I could begin working on the blanket! I took the template and began tracing it out on the fabric using a washable wax pencil (or any washable pencil like a chalk pencil* would do). I took time to make sure I was using the most out of each pair of jeans: my squares were aligned and followed the grainline of the fabric. I continued to mark and cut the squares until I had 99 pieces in total.
I ended up using 5 different pairs of womens size 10 jeans to make this picnic blanket.
The next step was the fun part: l laid out the squares in a creative and visually appealing pattern. Or you can do random as well if you prefer.
I marked the back side of the square at the start of each row with a number (1 to 11). This is important most especially when you are creating a pattern. I stacked each row the same way working from left to right. And then I began sewing the squares together along each row starting with row 1. After this, I finished the raw edges using a serging machine (zig zag stitching works as well if you don’t have a serger).
Next, it was time to join the rows together starting with completed row 1 and working up towards row 11. Take care to align the intersecting seams on each row as your sewing. Serge the length of the seam allowance to eliminate raw edges.
The blanket is almost done! Iron out the seams so they are neatly pressed to one side (you can also do this as you finish sewing your rows).
The next step is to finish the edges of the blanket with a ½” wide cotton binding or by simply turning edges under and topstitching.
And the final step is to add a tie so the blanket when rolled up stays in place. I chose to use one of the waistbands from the unwanted jeans to make the tie. I cut the waistband away from the rest of the jeans, cutting close the seam allowance.
And done! So who’s up for a picnic in the park?
What other ways have you thought to repurpose old clothes?